Skip to main content

Resetting Solarman Stick Logger

According to the official Solarman document "Stick Logger Quick Guide USER MANUAL for SOLARMAN", the proper way to reset the logger is:

  1. Press and hold the reset button for 10 seconds.
  2. After 4 seconds, all lights will be extinguished.
  3. The READY light will start flashing fast (every 100ms).

When the official reset does not work​

Sometimes the reset process above does not work. The trick that has worked reliably:

  1. Turn off the Wi-Fi device (router/AP) the logger is currently connected to.
  2. Wait for about 10 minutes.
  3. The logger will fall back into AP mode and the AP_xxxxxxxx Wi-Fi network will appear.
  4. Connect to that AP_xxx Wi-Fi network.
  5. Open a browser and go to http://10.10.100.254 to access the logger's gateway/configuration page.

Tips​

  • Once connected to the home network, assign the logger a static IP from the router's DHCP reservations. This makes integration with Home Assistant stable, since the integration relies on the logger's IP staying the same.